Chapter 8 Automatic Measurement - UNI-T UPO2000CS Series User Manual

Chapter 8 Automatic Measurement

UPO2000CS series digital fluorescence oscilloscope can automatically measure up to 34 parameters. Press the
MEASURE button to enter the automatic measurement menu.
Automatic Measurement Menu
Functions Options
Signal CH1, CH2, CH3,
Source CH4
Off
All
Parameters
On
User Defined On/Off
Off
Measurement
Peak
Statistical
Analysis
Difference
Next Page
Automatic Measurement Menu (2)
Functions Options
Signal CH1, CH2, CH3,
Source CH4
Indicator
Selection
Off
Indicator
On
Clear
Return
Descriptions
Select data source from any one of the CH1~CH4
Close all Parameters
Pop-up window with all parameters is displayed
Open/Close menu for user defined paraters. When it is on,
define all parameters required with the Multipurpose knob. It
can customize and display up to 5 parameters at the same
time.
Turn off feature
Automatic calculation of user defined parameters of average,
max, and min. Only applicable when user defined parameters
are present.
Automatic calculation of user defined parameters of average,
difference, and number of measurements. Only applicable
when user defined parameters are present.
Go onto the next page
Descriptions
Select data source from any one of the CH1~CH4
Using the Multipurpose knob, up to 34 parameters can be
selected.
Close parameter indicator
Open parameter indicator
Clear all parameters
Return to automatic measure main menu
64
UPO2000CS series User Manual