Waveform Recording; Pass Test - UNI-T UPO2000CS Series User Manual

UPO2000CS series User Manua

11.1 Waveform Recording

Press UTILITY then press F5 to enter auxiliary function settings menu (2). Press F1 to enter the wave recording
menu.
Waveform Recording Menu
Functions Options
Close
Record Settings
Operation
Press F1 to select recording operation, and set parameters for waveform recording.
Record Settings Menu
Functions Options
Record Settings
Record
100ns~10s
Length
End
1~65000
Frame
Playback
10ms~1s
Delay
Largest
65000
Frame
After setting up the recording parameters, the recording operation can be performed by pressing F1.
Record Operation Menu
Functions Options
Record Operation
Playback
Stop
Record

11.2 Pass Test

The pass (fail) test is by using a template to detect whether the input signal satisfies the template requirements.
Descriptions
Close Record Function
Enter Record Settings Menu
Enter Record Operation Menu
Descriptions
Set Record Parameters
Set waveform record interval between each frame
Set the frame where recording automatically ends
Set the delay between each frame set when playing
Shows the maximum number of frames which can be
recorded (will change according to current storage depth)
Descriptions
Carry out record, playback, and stop operation.
Playback the recorded waveform
Stop recording or playback waveform
Start recording waveform
75