Chapter Vii Measurement Parameters; Measurement Menu - UNI-T UTD2000 Series User Manual

Chapter VII
UTD2000 series DSO support up to 34 types of waveform measurement parameters.
Figure 7-1 Function Key of Auto Measurement

7.1 Measurement Menu

Press MEASURE to enter Measurement menu.
Function Menu Setting
Main source CH1, CH2, MATH
Slave source CH1, CH2, MATH
OFF
All parameters
ON
Custom
parameter
Next page
Function Menu Setting
Indication
selection
OFF
Indicator
ON
Clear
OFF
Measurement
statistics
ON
Previouse page
Automatic Measurement
Automatic measurement menu (Page 1)
Description
Select CH1 or CH2 as source.
Select CH1 or CH2 as source.
Close all display boxes of measurement parameters.
Pop up a display box with all measurement parameters.
Pop up a selection interface with custom parameters, press the
multifunctional knob to display parameters. Press custom parameter key
or MENU key to close the selection interface, extremum and average value
will be displayed on the screen.
Go to next page
Automatic measurement menu (Page 2)
Description
By adjusting multifunctional knob, select the indicated parameter from
34 types of automatic measurement parameters.
Turn off indicator function.
Indicate the physical significance of indicator parameters.
Clear all custom parameters.
Turn off measurement statistics function.
Turn on measurement statistics function.
Go to previous page.
37
UTD2000 Series User Manual