Table of Contents
Advertisement
User's Manual
rotate as shown in the following figure.
Figure 5-3 Remove Handle
6. Measurement Preparation
6.1 Power On
Connecting standard power line to make sure that the instrument is power on normally.
Power supply switch in the lower left on the panel, it is a slight electronic switch. Indicator
is yellow, indicating that the power of the instrument is enabled.
After confirming that the instrument is powered on, please turn off the power button. At this time, the
power indicator will appear red.
Warning: Please make sure that the power voltage is matched with supply voltage.
Otherwise, the instrument may burnout.
The main power plug must connect to the power socket with protective grounding.
Do not use the wire board without protective grounding.
Instruments.uni-trend.com
Figure 5-1 Original Position
Figure 5-2 Test Position
Figure 5-4 Lift Position
UT3200+ Series
15 / 40
Advertisement
Table of Contents
