Paper Supply - Xerox WorkCentre Pro 421 User Manual

Paper Supply

Quick Pathway
½
Paper Supply
½
Tray 1
½
Tray 2
½
Bypass tray
½
Auto Paper
½
Load originals.
½
Press the [Paper Supply] key.
½
Select the Paper Supply
option required for the job
using the scroll keys.
½
Press [Start].
WorkCentre Pro 421 User Guide
Use the Paper Supply options to select the paper tray
required for the job. Using Auto Paper allows the machine
to select the paper tray based on the default setting or the
size of original being copied.
The machine does not automatically detect the size of the
paper in the trays. The user must program the size of
paper in each tray using the Paper Trays option in Machine
Defaults.
HINT: For information about loading paper, refer to
"Loading Paper" on page 5-24. Paper size and orientation
assigned to each paper tray (also bypass tray), should be
setup in using Machine Status, refer to page 7-3 for
instructions.
Ready to copy
Paper
Supply:
Paper Supply Options
Use to select an individual paper tray. Paper size and
orientation is displayed on the right side of the illustration.
Use to select the bypass tray. Paper size and orientation is
displayed on the right side of the illustration.
Auto Paper Accepts the default setting for the paper supply. If a specific
paper size is not selected, the WorkCentre Pro 421 defaults to
the size it senses from the original and selects the appropriate
tray.
1 :8.5x11"
2 :11x17"
:A4
Auto Paper
1
3-13