Xerox WorkCentre Pro 421 User Manual page 93

Front Cover
WorkCentre Pro 421 User Guide
-
NOTE: Paper Tray settings selected in the application will
override those selected in the printer driver.
The Front Cover tab enables you to use different paper (such
as letterhead) for the first sheet of paper in your print job.
To enable the media type and paper tray settings, select Front
Cover Different. The settings you specify appear in the Paper
Summary Box on the Paper/Output dialog.
The settings you select on this tab will override any front cover
settings in the application.
You cannot change Paper Size on this tab. To do so, select the
Document Body tab.
NOTE: This feature is not available with 2 sided printing.
Separators Separators enable you to put a page divider between each
printed page of a document and after the final page. This is
useful when you print items such as transparencies and want
a blank sheet of plain paper between each transparency sheet.
To use separators, you must enable collation and single-sided
printing on the Paper/Output tab.
To modify any of the settings, select Use Separators. Doing so
will enable the media Type and Paper Tray drop-down boxes.
The settings you choose appear in the Paper Summary Box on
the Paper/Output dialog.
NOTE: The Separators driver settings will override the
Separators settings in the application.
Paper Tray
Select the paper tray containing the type of paper you
want to use for the document cover, body, and
separators, if any. Not all paper trays accept all paper
sizes. Only source locations which accept the specified
paper size are shown. Auto Tray Select is the default
option.
If you select a paper tray and then select a paper size
not supported by that tray, the paper tray option will
default to 'Auto Select Tray'.
4-19