Print Report; Department Code - Xerox WorkCentre Pro 421 User Manual

½
Select [Settings report] and
press [Enter].
The "Printing accepted"
message is displayed and
your report will be printed.
½
Press [Features] key to return
to the Ready mode.
7-22
To Print the Settings Report:

Print report

01. Department code

02. Settings report
Settings report
Printing accepted
NOTE: Total Pages represents the grand total for Scanned
and Printed pages, it is not the same as Drum count that is
found on the Activity Report.
NOTE: The firmware identification number is located at the
top of the Settings Report. Refer to this number when calling
for service.
WorkCentre Pro 421 User Guide