Gdi Print Driver - Xerox WorkCentre Pro 421 User Manual

GDI Print Driver

B-6
A GDI printer driver is available for the WorkCentre Pro 421
copier products - you can download it from the 'Drivers' area of
www.xerox.com. A User Guide and installation instructions are
included within the downloaded printer driver software.
The PC requirements are shown below:
Windows
Processor (MHz)
- Minimum
- Recommended
RAM (Mb)
- Minimum
- Recommended
Disk Space (Mb)
- Minimum
Parallel port on the PC must be set to 'bi-directional'.
IEEE 1284 Parallel Cable (10 metres or 30 feet maximum).
NOTE: You cannot have the 421 PCL driver installed on the
same PC as the GDI driver.
95 98 2000
150 150 150
450 450 450
32 64 64
64 128 128
4 4 4
WorkCentre Pro 421 User Guide
NT4 XP
150 233
450 450
64 64
128 128
8 4