Xerox WorkCentre Pro 421 User Manual page 167

½
Use the scroll key
select [Department code],
and then press [Enter].
½
Select [On] and press [Enter]
to access the setup screens.
½
Select [Modify current codes]
to setup new Department
Codes or modify existing
codes.
½
Press [Enter].
½
Enter the 5 digit Master Code
using the numeric keypad
and press [Enter].
If the code is correct, access
to the Department Code
setup screens is provided.
WorkCentre Pro 421 User Guide
Setup of individual Department Codes
to
Machine defaults
01. Paper trays
02. Timers
03. Interrupt key
04. Speaker volume
05. Department code
Department codes
1. On
2. Off
Department codes
1. Modify current codes
2. Delete all codes
3. Print all codes
NOTE: If you entered the Master Code to gain access to the
machine, you will not have to enter it again here.
Master code
Enter master code :
7-13