Preventing Paper Jams - Xerox WorkCentre Pro 421 User Manual

½
Open the exit cover as shown
here.
½
Remove any jammed paper
inside the exit unit.
½
Use the scroll key
proceed to the next step and
press [Enter].
½
Close the exit cover and the
right hand side cover.
6-4
to
NOTE: The display instructions may vary depending on the
options installed.

Preventing Paper Jams

Paper jams happen for a variety of reasons. Use the following
recommendations to reduce the potential for jams.
- Use only recommended paper. (Refer to Appendix B -
Specifications).
- Store paper in dry conditions, away from extreme heat or
cold. Protect unused paper by storing it in its wrapper, on
a flat surface, until you are ready to use it.
- Paper must be loaded correctly in the tray you select for
the job. The orientation of the paper in the paper tray must
match the orientation of the originals. Check the fill line in
the tray to make sure the paper tray is not overloaded.
- Do not use paper that is torn, wrinkled, or folded.
- Ensure that the paper size has been selected correctly for
the relevant paper tray.
Clear paper jam
Close side cover
3/3
WorkCentre Pro 421 User Guide