Printer Driver Features; Control Options - Xerox WorkCentre Pro 421 User Manual

Printer Driver Features

Control Options

WorkCentre Pro 421 User Guide
There are a number of Printer Drivers available for the
WorkCentre Pro 421. The features available depends on the
printer driver being used. The following feature descriptions
are an overview of the typical features provided by the
WorkCentre Pro 421 Printer Drivers.
For information about a specific Printer Driver feature, please
refer to the online Help facility provided as part of the Printer
Driver software.
There are a number of options which appear on all of the
printer driver screens:
OK Saves all the new settings and closes the driver or dialog.
These new settings remain in effect until you change them.
Cancel Closes the dialog and returns all settings in the tabs to the
values that were in place before you opened the dialog. Any
changes you have made are lost.
Apply Saves all the changes you have made without closing the
driver.
Defaults Resets the current tab and all its settings to the system default
values. The action of this button applies only to the current tab.
All other tabs remain unchanged.
Default All Resets options to default system values on the Paper Output,
Layout, and Image Options tabs. Other features and tabs may
not have specific default settings and will not be affected by this
button.
Help Select the [Help] button in the bottom right of the printer driver
screen or [F1] on the PC keyboard for information on the
displayed printer driver screen.
4-13