Xerox WorkCentre Pro 421 User Manual page 119

½
Ensure that the lip at the back
of the cleaning tool is resting
on the Transfer Corotron Wire
casing. Ensure that the two
shoulders are located under
the plastic guard.
½
Hold the cleaning tool upright
and slide it along the Transfer
Corotron Wire from left to right.
If the cleaning tool is
positioned correctly it will slide
easily without any resistance.
½
This action will remove any
dust or dirt.
½
Close the side cover.
½
If installed, close the Auto
Duplex Unit.
WorkCentre Pro 421 User Guide
Transfer
Corotron Wire
casing
Plastic guard
5-7