Edge Erase - Xerox WorkCentre Pro 421 User Manual

Edge Erase

NOTE: Ensure that the originals
are in the same orientation as
the media loaded in the paper
tray.
½
Load originals.
½
Use the scroll key
select [Added Features].
½
Use the scroll key
select [Edge Erase] and
press [Enter].
½
Select the option required
and press [Enter].
½
Press [Start] to initiate the
copying process.
3-22
Use this feature to erase unwanted marks such as hole punch
impressions from the edge of the copy.
NOTE: There are a number of features which are not
available with Edge Erase. Any features not available will be
grayed-out.
to
Edge Erase
to
Off
On
Edge Erase Options
Off The feature is unavailable.
On Erases a specific amount from each edge of the copy. Erases
between 4 and 20 mm (0.16 and 0.8 inches) from each edge.
Default is 10 mm (0.4 inches).
WorkCentre Pro 421 User Guide
1