Xerox Document WorkCentre 450C User Manual page 70

To change the time, press the LEFT ARROW key to
move the cursor to the left, press the RIGHT ARROW
key to move the cursor to the right, and press the EXIT/
CLEAR key to delete a highlighted number.
6. If you are using a 12-hour clock, press RIGHT
ARROW to switch between am and pm.
7. Press ENTER.
8. Enter the fax number and press START.
The WorkCentre stores the document to memory until it
sends the fax at the specified time.
Note If your document remains in the document tray,
the Always send from memory option is not selected
on the ControlCentre's Fax Out property page. To
select the option, see
later in this chapter.
Using a confidential charge code
when sending a fax
Depending on your telephone system, you might need to
use a charge code when sending a fax to a number outside
your local area. A charge code could be your calling card
number or some other number your long-distance service
provides. To keep the charge code confidential, the
WorkCentre does not display the code on the control panel
LCD or print the code on any reports.
"Changing the fax out options"
70