Xerox Document WorkCentre 450C User Manual page 44

message in the WorkCentre 450c Status window and on the
control panel LCD. If your print quality is good, press the
START key on the control panel and continue using the ink
jet cartridge.
If you need to replace the high capacity ink jet cartridge,
use the following procedure. You can also use the
procedure to install an ink jet cartridge for the first time,
and to reinstall a previously used ink jet cartridge when
changing from color to black-and-white printing.
Note If you run out of ink while printing faxes or
documents stored to memory, any pages printed
before you change the ink cartridge are lost.
1. At the WorkCentre 450c, press the CARTRIDGE key
to display [change] on the LCD.
2. Press ENTER.
The WorkCentre moves the high capacity ink jet
cartridge to the center of the printer so you can you
remove it.
Note If the high capacity ink jet cartridge does not
move to the center of the printer, unplug the
WorkCentre's power cord, wait a few seconds, and
then reconnect it.
44