Printing From Dos - Xerox Document WorkCentre 450C User Manual

4. Slide the paper guide to the left until it rests lightly
against the envelopes.
5. Install the printer output tray.

Printing from DOS

If you print from DOS or a DOS application, the
WorkCentre 450c includes a software application called the
DOS Control Panel. The DOS Control Panel enables you
to change DOS printing options such as font, point size, and
page orientation.
1. In DOS, do one of the following:
• On Windows 95 systems, change to the directory
c:\ProgramFiles\Xerox\WorkCentre450c.
• On Windows 3.1/3/11 systems, change to the
directory c:\xerox\xw450c.
2. Type x400cnpl
3. In the Control Panel window, change the options you
want.
4. Type O (for OK).
5. The options you chose are set on the WorkCentre.
Note Some DOS applications override the options
you set on the Control Panel
150