Security Settings - Xerox 8825 User Manual

SECURITY SETTINGS

114 Main Menu
7. Press the Enter key to confirm the new password. The
CHANGE PASSWORD screen will instruct you to re-enter the
new password.
CHANGE PASSWORD
RE-ENTER NEW PASSWORD:
8. Use the numeric keypad to re-enter the new password. The
password will display as asterisks.
9. Press the Enter key to confirm the re-entry. You will be returned
to the SYSTEM ADMINISTRATION menu screen. The new
password is now effective. The old password is no longer valid.
At most installations, users have the ability to recall the last image
scanned and all the settings associated with that image. The recalled
image can then be printed without the need to scan from the original
document.
Security concerns at certain installations, however, might require that the
image recall feature be disabled. The SECURITY SETTINGS option of
the System Administration menu allows the system administrator to
enable or disable the image recall feature. The default setting is
ENABLED.
To enable/disable the image recall feature:
1. Access the SYSTEM ADMINISTRATION menu.
2. Press the Next key until SECURITY SETTINGS is highlighted.
3. Press the Enter key to select SECURITY SETTINGS. The
SECURITY SETTINGS screen is displayed.
SECURITY SETTINGS
IMAGE RECALL:
4. Press the Previous or Next key to highlight the desired
response, ENABLED or DISABLED.
5. Press the Enter key to confirm your selection.
6. Press the Exit key to return to the SYSTEM ADMINISTRATION
menu screen.
ENABLED
XEROX WIDE FORMAT COPY SYSTEM