Scanning Oversized Documents; Long Documents; Wide Documents - Xerox 8825 User Manual

Scanning oversized documents

XEROX WIDE FORMAT COPY SYSTEM
Scanning oversized documents
An oversized document is defined as any document that is larger in width
or length than a standard E-size (A0) document.

LONG DOCUMENTS

Operator assistance will be required to guide and control the position of a
long document to prevent it from skewing or moving from side-t o-side as
it feeds through the scanner. Documents longer than 36 inches (914
mm) will always exit to the rear of the Scanner.

WIDE DOCUMENTS

Documents wider than 36 inches (914 mm) but less than 42 inches
(1057 mm) can be scanned. However, the scanned image area, of a
document centered on the Feed-in Tray, is 36 inches (914 mm). Any
image beyond the 36 inch (914 mm) width will be clipped off on the
output copy.
When a document wider than 36 inches (914 mm) is inserted into the
Document Handler, a message will be displayed to enter the scan width.
To scan the document, enter 36 in.(914 mm) then press the Enter key to
start the scan. A number larger than 36 (914) will not be accepted.
Scanning oversized documents 55