Xerox 8825 User Manual page 127

Wide format copy system
Hide thumbs Also See for 8825:
Table of Contents

Advertisement

RESET NVR DEFAULTS
SCANNER RELIABILITY
METER
XEROX WIDE FORMAT COPY SYSTEM
The RESET NVR DEFAULTS option is for use by the Customer Service
Engineer only and requires the entry of the diagnostic password. It
allows the Customer Service Engineer to reset the NVR values to the
factory default values.
If you select this option, the RESET NVR DEFAULTS screen is
displayed. You cannot perform any functions in this screen. Press the
Exit key to return to the SCANNER DIAGNOSTICS menu screen.
Below is an illustration of the RESET NVR DEFAULTS screen.
RESET NVR DEFAULTS
WARNING: THIS FUNCTION
DESTROYS NVR CONTENTS
Select the SCANNER RELIABILITY METER option to view the current
value of the usage meter maintained by the Scanner. The meter counts
and displays the number of linear feet since the Scanner Fault Log was
last cleared. The number of linear feet between fault occurrences is an
indication of the reliability of the Scanner.
To run the SCANNER RELIABILITY METER diagnostic:
1. Press the Menu key. The MAIN MENU screen is displayed.
2. Press the Next key until DIAGNOSTICS is highlighted.
3. Press the Enter key to select DIAGNOSTICS. The
DIAGNOSTICS menu screen is displayed.
4. Press the Next key until SCANNER DIAGNOSTICS is displayed.
5. Press the Enter key to select SCANNER DIAGNOSTICS. The
SCANNER DIAGNOSTICS menu screen is displayed.
6. Press the Next key until SCANNER RELIABILITY METER is
highlighted.
7. Press the Enter key to select SCANNER RELIABILITY METER.
The SCANNER RELIABILITY METER screen is displayed.
The Scanner usage meter is intended for gathering data about the
reliability of the scanning mechanism. This meter measures linear usage
only. Units are displayed as either feet or meters depending on the
display units selected for the machine. Refer to "Localization" in the
"Main Menu" section for complete information about setting the display
units.
Below is an example of the SCANNER RELIABILITY METER screen. In
the example, the units are displayed as feet.
EXECUTE:
NO
Main Menu
121

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents