Xerox 8825 User Manual page 17

XEROX WIDE FORMAT COPY SYSTEM
Source
The Source option allows you to select the source of the media on which
the image will be printed. To select the media source, press the key
beneath the Source settings until the desired source indicator lamp
illuminates.
The Source settings are:
Sheet - This setting tells the Printer to print from a manually
inserted sheet of media.
R4 - This setting is applicable to the WIDE FORMAT COPY
SYSTEM 721P only. When it is selected on the WIDE FORMAT
COPY SYSTEM 721P, both the R1 and R3 indicator lamps
illuminate and the Printer selects the media stored on Roll 4.
R3 - This setting is applicable to the, WIDE FORMAT COPY
SYSTEM, 8850, 721P, and WIDE FORMAT 510 Series (3
Drawer) only. When it is selected on those systems, the R3
indicator lamp illuminates and the Printer selects the media
stored on Roll 3.
R2 - This setting tells the Printer to select the media stored on
Roll 2.
R1 - This setting tells the Printer to select the media stored on
Roll 1.
Auto (factory default) - This setting automatically selects the roll
containing the media that best fits the size of the captured
image. For most documents, the Scanner is able to
automatically detect the width of the scanned document. This
permits the Auto function to automatically select the most
appropriate roll of media.
NOTE: Roll 2 and sheet feed are optional on XEROX WIDE FORMAT
8825. Roll 2 and 3 are optional on the XEROX WIDE FORMAT 510dp
Series. If these options are not installed, they cannot be selected. To
print from a cut sheet, Sheet mode must be explicitly selected. The Auto
mode cannot select a cut sheet.
Type
The Type option allows you to select the kind of media on which to print -
Bond, Vellum/Tracing, or Film. To select the media type, press the key
beneath the Type settings until the desired type indicator lamp
illuminates.
NOTE: Only media types actually loaded into the Printer can be
selected. When a roll is selected, the media type for that roll is
automatically selected also. If more than one media type is loaded when
the media source is set to Auto, the default choice priority is Bond (first),
Vellum (second), and Film (third). Refer to the applicable Printer
Operator Manual for instructions about how to load rolls and specify the
width and media type.
Getting to know the WIDE FORMAT COPY SYSTEM 11