Table of Contents
Advertisement
Hardware and Installation Manual
Customer-Supplied Information
The customer's network administrator provides the following information:
Two IP addresses on the provisioning network
Netmask of the provisioning network
Default router on the provisioning network
Network Configuration
SM and Sync Network addresses are configured to default values at ExAP or LSMS initialization and
should not need to be changed. If they need to be changed for any reason, refer to sections "Network
Connection" and "Configuration Menu" in the Administration and LNP Feature Activation manual for
ELAP, or the Administration Manual for EPAP.
The provisioning network addresses are configured using the ExAP or LSMS user interface configuration
menu; refer to "Configuration Menu" in the Administration and LNP Feature Activation manual for
ELAP or the Administration Manual for EPAP.
Firewall and Router Filtering Considerations
If a firewall is installed in the provisioning network between the MPS systems or between the MPS
system(s) and the provisioning system, it must be configured to allow selected traffic to pass.
For firewall protocol filtering for the various interfaces, see either the Administration Manual for EPAP
or the Administration and LNP Feature Activation manual for ELAP.
910-6535-001 Revision D, February 2014
ExAP or LSMS Network Integration
54
Advertisement
Table of Contents
Need help?
Do you have a question about the EAGLE Application B Card and is the answer not in the manual?
Questions and answers