Table of Contents
Advertisement
Hardware and Installation Manual
Figure 14: E5-APP-B Card Eject Hardware Switch, UNLOCKED
2. WAIT for the E5-APP-B Eject Status LED to go from blinking red to a steady red.
3. Grasp the upper and lower card Inject/Eject (I/E) lever release (3) just underneath the I/E lever,
and press it to meet the I/E lever. This is the mechanical interlock for the card.
See
Figure 15: E5-APP-B Card UNLOCKED
910-6535-001 Revision D, February 2014
Installing and Removing E5-APP-B Cards
45
Advertisement
Table of Contents
