Figure 27 Input Panel Screws; Figure 28 Partition Labels - GE Infinity M Series Installation Manual

High capacity with horizontal distribution, 13 u system with galaxy pulsar plus controller, 22u system with galaxy millennium ii controller, initial/supplemental frame, 22u system with supplemental frame and galaxy millennium ii controller

Hide thumbs

Table Of Contents

Table of Contents

NE-M Installation Guide

CAUTION:

Personal injury and Equipment Damage

PV Disconnect Panel with disconnects rated at 300Vdc on each PV conductor is required for use

with Solar Arrays (PV sources).

Step

Remove the Input Panel cover (4 captive screws).

Apply labels onto PV/AC Partition as shown.

•

Place "PV WIRING" label on the left (PV) side of partition.

•

Place the "AC WIRING" label on the right (AC) side of

partition.

Make space for the PV/AC Partition - Separate DIN rail Terminal

Blocks to make space for the PV/AC Partition.

Loosen screws securing all DIN spacer blocks to the left of the

Partition location specified in the site engineering instructions.

850050111

Issue 03 August 2017

Action