Configure Millennium Ii Controller; Figure 87 Front Panel - Millennium Ii Controller; Table 10 Push Buttons - Millennium Ii - GE Infinity M Series Installation Manual

NE-M Installation Guide

Configure Millennium II Controller

Plant Status LEDs Alarm Test
Voltage Test Jacks
Button Function
+
Display Contrast
Parameter Change
−
▲
◄ ►
Navigate
▼
Enter Enter
ESC Escape
Menu Menu
Help Help
The Millennium II controller's primary user interface is the front panel, which includes a backlit LCD, and an array of
pushbutton controls. SW202-8 must be set to ENABLED for changes to be made from the front panel. This section
covers the basic operations that must be performed so that the controller is minimally configured.
850050111 Issue 03 August 2017
Plant Voltage and Load
Number of Alarms
and Warnings
Menu Navigation
RS-232 Port

Figure 87 Front Panel - Millennium II Controller

Table 10 Push Buttons - Millennium II

Action
Increase or decrease the display contrast (in Main Display).
Increase or decrease the value of the selected parameter.
Navigate menus – move to different selected menu item.
Enter a sub-menu or confirms a parameter change.
Go up one menu level or exits a parameter change without saving.
Go to the Main Menu.
Display available Help information.
Current
Date and Time
Increment / Decrement
H5692448
Plant
Mode
65