Appendix 1-4-2 Cm10-Ap**S Angle Plug Connector - Mitsubishi Electric MELDAS MDS-R Series Technical Specification And Instruction Manual

Appendix 1-4-2 CM10-AP**S Angle Plug Connector

This section explains how to assemble the wire to CM10 angle plug connector.
(1) Cutting a cable
Cut the cable to the following dimensions:
* Cable length after cutting = CM10 - AP**S ： A + cable length
(2) Stripping a cable sheath
Strip the cable sheath to the following dimensions:
Core
wire
Appendix 1. Cable and Connector Specifications
= A + cable length
Product name
CM10-AP**S-S-**
CM10-AP**S-M-**
CM10-AP**S-L-**
A
Product name
CM10-AP**S-S-**
CM10-AP**S-M-**
CM10-AP**S-L-**
A1 - 20
Cable length
A
40mm
55mm
Sheath
A
30mm
45mm