5-5 Noise filter
(1) Selection
Use an EMC noise filter if the noise conducted to the power line must be reduced. Select an EMC
noise filter taking the drive unit's input rated voltage and input rated current into consideration.
(2) Noise filter mounting position
Install the noise filter to the drive unit's power input as the diagram below indicates.
Power
distribution panel
Breaker
Power
supply
Recommended devices:
Contact:
(Note) The above devices may be changed at the manufacturer's discretion.
Contact each manufacturer for more information.
5. Peripheral Devices
Contactor
Noise filter
(Note) The noise filter must be prepared by the user.
Densei-lambda
Soshin Electric
Densei-lambda Co., Ltd.
Soshin Electric Co., Ltd.
5 - 8
R
MDS-R-V1/V2
S
T
MX13 Series
HF3000C-TM Series
TEL0120-507039
http://www.densei-lambda.com
TEL03-3775-9112(+81-3-3775-9112)
http://www.soshin.co.jp
Drive unit