Explanation Of Each Part - Mitsubishi Electric MELDAS MDS-R Series Technical Specification And Instruction Manual

2-2-4 Explanation of each part

(1) Explanation of each servo drive unit part
<1>
<4>
<6>
<8>
<12>
<13>
<16>
MDS-R-V1 (1-axis servo drive unit)
The connector layout differs according to the unit being used. Refer to each unit's outline drawing
for details.
Each part name
<1> LED
<2> SW1
<3> BT1A
<4> CN1A
<5> CN1B
<6> CN9
<7> CN4
<8> CN2L
<9> CN2M
CN3L
<10>
CN3M
<11>
<12> CN22
<13> ---
<14> CN31L
<15> CN31M
<16> CN30 L1, L2, L3, PE, P, C
(Note) CN2M/CN31M are not mounted with the MDS-R-V1 unit.
2. Specifications
<2>
<3>
<5>
<7>
<10>
<14>
Name
--- Unit status indication LED
--- Axis No. setting switch (Left: L axis, Right: M axis)
--- Battery connection connector
--- NC or upward axis communication connector
--- Battery unit/Terminator/Lower axis communication connector
--- Analog output connector
--- Maintenance connector
--- Motor side detector connection connector (L axis)
--- Motor side detector connection connector (M axis)
--- Machine side detector connection connector (L-axis)
--- Machine side detector connection connector (M-axis)
--- Control power (24VDC) input connector
CHARGE LAMP Converter voltage output discharge status indication LED
LU, LV, LW, PE L axis motor drive output (3-phase AC output) connector
MU, MV, MW, PE M axis motor drive output (3-phase AC output) connector
Power input (3-phase AC input), regenerative resistor
connection connector
<1>
<4>
<6>
<8>
<9>
<12>
<13>
<16>
MDS-R-V2 (2-axis servo drive unit)
Description
2 - 21
<2>
<3>
<5>
<7>
<10>
<11>
<14>
<15>