Mitsubishi Electric MELDAS MDS-R Series Technical Specification And Instruction Manual page 217

(9) When using a conduit
[1] Tighten the nipple of conduit connector on the plug connector (CM10).
[2] Set the conduit on the nipple of conduit connector.
[3] When using by moving part, fix conduit on the saddle etc.,
Take care not to damage for plug connector (CM10) and conduit connector.
Set the protective cover (rubber etc.,) on the conduit for takes care not to cable damage.
[1]
Plug connector
Conduit
connector
Recommended conduit
Type: VF Type: SR Type: FBN Type: EM Type: VFS Type: SRK etc
Recommended connector
Recommended
connector
RCM103S
RCM103M
RCM104L
Appendix 1. Cable and Connector Specifications
[2]
Plug connector
(nipple)
Cable
Applicable connector type
CM10-SP10S-S/CM10-AP-10S-S
CM10-SP10S-M/CM10-AP-10S-M
CM10-SP10S-L/CM10-AP-10S-L
A1 - 19
[3]
Plug connector
Conduit
connector
Conduit
Protective cover
(rubber etc.)
Applicable cable range
φ4.0 toφ6.0mm
φ6.0 toφ9.0mm
φ9.0 toφ12.0mm
Conduit
connector
Conduit
Saddle