Figure G-2. Rdp Board Connection To Unidex 511 Board - Aerotech UNIDEX 511 User Manual

Appendix G
G.3.
To connect the RDP board to the UNIDEX 511 board, connect the 50-pin ribbon cable
from P3 of the RDP board to P3 of the UNIDEX 511 board. Refer to Figure G-2.
WARNING
G-6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Installing the RDP Board into the UNIDEX 511
Make sure pin #1 of the ribbon cable mates with pin #1 of the P3 connectors.
U511 Control
Board
Optional
RDP-PC
Board
Pin # 1
P3 (U511)
P3 (RDP-PC)
Connecting Ribbon Cable
UNIDEX 511 - Top View
Figure G-2. RDP Board Connection to UNIDEX 511 Board
Always disconnect main power connection before opening the U511 chassis.
Aerotech, Inc.
U511 User's Manual
Pin # 1
Version 1.1