38
Connect Devices
Figure 22: 2-Wire Connection 24 V
6.2.3
3-Wire Connection
For the 3-wire connection 24 V example, the power for the signal conditioner is
supplied from the I/O module directly.
Note
Field supply must be provided!
An additional supply module must be used, which provides 24 V field
supply voltage via the power jumper contacts.
Figure 23: 3-Wire Connection 24°V
Pos : 71 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
WAGO-I/O-SYSTEM 750
753-466 2 AI 4-20 mA S.E.
Manual
Version 1.5.0