Cage Clamp; Figure 4: Cage Clamp ® Connectors; Table 6: Legend For Figure "Cage Clamp ® Connectors - WAGO 750-439 Manual

WAGO-I/O-SYSTEM 750
750-439 8DI NAMUR Ex i
3.2.3

CAGE CLAMP

Figure 4: CAGE CLAMP
Table 6: Legend for Figure "CAGE CLAMP
Channel Designation
1
2
3
4
5
6
7
8
1 ... 8
Use shielded signal lines!
Only use shielded signal lines. Only then can you ensure that the accuracy and
interference immunity specified for the respective I/O module can be achieved
even in the presence of interference acting on the signal cable.
Shield Connection System for Electromagnetic Compatibility!
The WAGO Shield Connection System offers a full range of accessories for
maintaining electromagnetic compatibility (EMC)! Related information is available
at www.wago.com.
®
Connectors
®
Connectors
®
Connectors"
Connector Function
DI 1 E1
DI 2 E2
DI 3 E3
DI 4 E4
DI 5 E5
DI 6 E6
DI 7 E7
DI 8 E8
0 V 0 V (8×)
Version 1.3.0, valid from HW Version 03, SW Version 03
Device Description
Digital input DI 1: Signal voltage +
Digital input DI 2: Signal voltage +
Digital input DI 3: Signal voltage +
Digital input DI 4: Signal voltage +
Digital input DI 5: Signal voltage +
Digital input DI 6: Signal voltage +
Digital input DI 7: Signal voltage +
Digital input DI 8: Signal voltage +
Digital inputs DI 1 ... DI 8:
Signal voltage −
19
Manual