Cage Clamp ® Connectors; Figure 4: Cage Clamp ® Connectors; Table 5: Legend For Figure "Cage Clamp ® Connectors - WAGO 750-431/040-000 Manual

WAGO-I/O-SYSTEM 750 XTR
750-431/040-000 8DI 24 VDC 0.2ms XTR
Do not exceed maximum values via power contacts!
The maximum current that can flow through the power jumper contacts is 10 A.
The power jumper contacts can be damaged and the permissible operating
temperature can be exceeded by higher current values.
When configuring the system, do not exceed the permissible maximum current
value. If there is a higher power requirement, you must use an additional supply
module to provide the field voltage.
3.2.3 CAGE CLAMP
Figure 4: CAGE CLAMP
Table 5: Legend for Figure "CAGE CLAMP
Channel
1
2
3
4
5
6
7
8
®
Connectors
®
Connectors
®
Designation Connector Function
DI 1
DI 2
DI 3
DI 4
DI 5
DI 6
DI 7
DI 8
Device Description
Connectors"
1 Input DI 1: Signal voltage
5 Input DI 2: Signal voltage
2 Input DI 3: Signal voltage
6 Input DI 4: Signal voltage
3 Input DI 5: Signal voltage
7 Input DI 6: Signal voltage
4 Input DI 7: Signal voltage
8 Input DI 8: Signal voltage
19
Manual
Version 1.1.0