Approvals - WAGO 750-439 Manual

26 Device Description
3.7

Approvals

More information about approvals.
Detailed references to the approvals are listed in the document "Overview
Approvals WAGO I/O SYSTEM 750", which you can find via the internet under:
www.wago.com
The following approvals have been granted to 750-439 I/O modules:
The following Ex approvals have been granted to 750-439 I/O modules:
Manual
Version 1.3.0, valid from HW Version 03, SW Version 03
 DOWNLOADS  Documentation  System Description.
Conformity Marking
UL E175199 for
use in Ordinary
Location
Korea Certification
TÜV 12 ATEX 106032 X
I M2 (M1) Ex d [ia Ma] I Mb
II 3 (1) G Ex ec [ia Ga] IIC T4 Gc
II 3 (1) D Ex tc [ia Da] IIIC T135°C Dc
IECEx TUN 12.0039 X
Ex d [ia Ma] I Mb
Ex ec [ia Ga] IIC T4 Gc
Ex tc [ia Da] IIIC T135°C Dc
TÜV 14.1911 X
Ex d [ia Ma] I Mb
Ex nA [ia Ga] IIC T4 Gc
Ex tc [ia Da] IIIC T135°C Dc
UL E480271 for Use in Zone Classified Hazardous Locations
Cl I Zn 2 AEx nA [ia Ga] IIC T4 Gc
Cl I Zn 2 AEx nA [ia IIIC] IIC T4 Gc
Ex nA [ia Ga] IIC T4 Gc X
Ex nA [ia IIIC] IIC T4 Gc X
UL E198726 for Use in Hazardous Locations
Cl I, Div 2, Group A, B, C, D, T4
WAGO-I/O-SYSTEM 750
750-439 8DI NAMUR Ex i
MSIP-REM-W43-DIM750