Power-On Password Enable/Disable; Power-On Password Change - Key-Disp KD68C User Manual

Power-on Password Enable/Disable

Press UP or DOWN button to choose Disable or Enable and press ON/OFF button to
confirm. Power-on Password default is Disable. If you choose Enable, press ON/OFF
button to enter Power-on Password Change interface, otherwise exit the power-on
password settings interface.

Power-on Password Change

When the display shows "Password Set, P3", press UP/DOWN to change the value
and then press ON/OFF to confirm digit one by one until the new 4-digit password is
completed.
To store the new power-on password, hold ON/OFF button for 2 s and exit
settings.
When you switch on the E-bike system next time, the display will show P1,0000,
please input the new password to power on.
Power-on Password Input Interface
Power-on Password Disable/Enable Interface
Power-on Password Change Interface
10