Chapter 2 Introduction; Introduction; Preparing For Installation - Raven AutoBoom Installation Manual

I NTRODUCTION
CHAPTER
C H A P T E R 2
2

INTRODUCTION

Congratulations on your purchase of the Raven AutoBoom system! This system is designed to provide automated
boom height adjustment for agricultural equipment.
This manual applies to the following machines. For future reference, write your serial number in the space below.
MAKE: New Holland
MODEL: Guardian F Series with Mono Boom
YEAR: 2018
MAKE: Miller
MODEL: Nitro N7 Series with Mono Boom
YEAR: 2018
FIGURE 1. Miller Nitro N7 Series with Mono Boom

PREPARING FOR INSTALLATION

Before installing AutoBoom, park the machine where the ground is level, clean, and dry. Leave the machine
turned off for the duration of the installation process.
During the installation process, follow good safety practices. Be sure to carefully read the instructions in this
manual as you complete the installation process.
P/N 016-0230-124 Rev. A 7