Polycom VVX Series User Manual page 117

After you install the software, you need to make changes to your phone to establish a connection to your
computer and provide an exception to your firewall or anti-virus software to unblock the PDC program.
Connect Using the Direct Method
If your phone and computer are connected using an Ethernet cable, use the direct method to enable the
PDC. Using this method, your phone automatically detects your computer's access credentials.
Procedure
1. On your computer, click Start > Programs > Polycom > Polycom Desktop Connector.
The PDC icon is displayed as an active program on your taskbar as shown next.
2. On your phone, navigate to Settings > Basic > PDC Configuration.
3. On the PDC Configuration screen, set the Status field to Enabled and select Save.
Your settings are saved and the Basic screen is displayed.
4. On the PDC Configuration screen, select Reconnect.
A dialog box is displayed on your phone screen asking if you wish to share your remote keyboard
and mouse.
5. Select Yes.
A dialog box is displayed asking you to specify your phone's position.
6. Specify whether your phone is to the left or right of your computer monitor.
A dialog box is displayed on your computer asking to allow remote control of your phone.
7. Click OK to complete the setup process.
The PDC icon turns red, shown next, indicating that you have successfully enabled the PDC
program.
Polycom, Inc.
Phone Accessories and Computer Applications
115