Polycom VVX Series User Manual page 118

Using the Indirect Method
If your phone and computer are connected through a switch, use the indirect method to enable the PDC.
This method requires you to find your computer's IP address and manually enter your computer access
credentials.
Find Your Computer's IP Address
You can find your computer's IP address using the Command Prompt on your computer.
Procedure
1. Click Start > All Programs > Accessories > Command Prompt.
2. In the Command Prompt, type ipconfig and press Enter.
3. Note your server address on the IPv4 Address line, as shown next.
Connect Using the Indirect Method
If your phone and computer are connected through a switch, use the indirect method to enable the PDC.
This method requires you to find your computer's IP address and manually enter your computer access
credentials.
After you find your phone's IP address, you can start the PDC program and connect your phone to your
computer using the indirect method.
Procedure
1. On your computer, click Start > Programs > Polycom > Polycom Desktop Connector.
The PDC icon is displayed as an active program on your taskbar as shown next.
Polycom, Inc.
Phone Accessories and Computer Applications
116