Saving Refraction Data - Ametek Reichert Phoroptor VRx User Manual

Instructions for Use

Saving Refraction Data

Store the measurements temporarily as Final, Mem 1, Mem 2, or Mem 3, or leave the data as
Subjective, once the values for a refraction are completed. Storing different data in Mem 1, Mem 2, or
Mem 3 allows the option of comparing different refraction data you are considering for your patient's
prescription. (Please refer to Figure IU-43.)
1. Touch the drop-down list on the top of the main refraction data area.
2. Select the category to which you want to save the refraction data.
Note: You can save and recall the refraction data for comparison or measurement values.
92
(continued)
Figure IU-43, Saving Refraction Data
16241-101 Rev. D