Ametek Reichert Phoroptor VRx User Manual page 58

Instructions for Use
Data Input
(continued)
Inputting Data Electronically
Direct Connection
The measurement data from the Lensmeter and Auto Refractor directly populates the LM and AR data
fields in the Controller display. The data transfer takes place when the user presses the data output
buttons on each external device.
Direct Connection to a Stored Data List
The user can send Lensmeter and Auto Refractor data to a data list (Imported Data List) that you can
import into the AR and LM data fields and use as the starting point of a refraction. You must check
the Store box in the Port Settings for Instrument 1 and Instrument 2. The data for a specific patient
is identified by a time stamp. Some external devices might also indicate an ID Number. This number
is generated by the Lensmeter or Auto Refractor when the user selects the Numbering option in the
Settings for the specific device.
1. Press the IN button to access the Imported Data List. (Please refer to Figure IU-11.)
2. Touch the data you want to import or use the CONTROL KNOB to select a data set.
a. Touch OK, or press the ENTER button or CONTROL KNOB to bring the selected data set
to the main screen.
b. Touch CANCEL or press the CLEAR button to exit without importing data.
58
(continued)
(continued)
Figure IU-11, Sphere Active Boxes
16241-101 Rev. D