Importing A Program From An Outside Source (Usb Drive); Clearing A Program - Ametek Reichert Phoroptor VRx User Manual

Instrument Setup
Programs
(continued)

Importing a Program from an outside source (USB drive)

1. Insert the outside source (USB drive) from which you want to import the program. (Please refer
to Figure IS-27.)
2. Touch the Number of the program into which you want to import the program steps.
Note: The imported program number must match the program number where it is placed (e.g.,
Program 1 from one VRx must be imported into Program 1 of another VRx unit).
3. Touch IMPORT in the menu bar at the bottom of the screen. The program is automatically
imported into the selected program.
4. Touch SAVE on the menu bar at the bottom of the screen to save the imported program.

Clearing a Program

1. Touch the number of the program you want to clear in the Program Selection panel.
2. Touch CLEAR in the menu bar at the bottom of the screen.
Note: Touching EXIT without first touching SAVE ignores any changes made in the Programs
screen. Be sure to save any changes.
42
(continued)
Figure IS-27, USB Drive
16241-101 Rev. D