Connect Acuity Systems To The Phoroptor Vrx - Ametek Reichert Phoroptor VRx User Manual

Instrument Setup
(continued)
® ®
Connect ClearChart 2 or ClearChart 3 Series to the Phoroptor VRx
Auto Projector Systems are directly connected to the Projector port on the Central Unit using a cable or
a wireless Bluetooth dongle, according to the cables specified in Appendix A.
Wired communication between the ClearChart 2 or ClearChart 3P and the Phoroptor VRx requires
connection of a cable, according to the cables specified in Appendix A. The cable connects to the serial
port on the ClearChart and the Projector port on the Central Unit.
Wireless communication between the ClearChart 2 or ClearChart 3P and the Phoroptor VRx requires
connection of the Bluetooth serial adapter to the serial port on the bottom of the ClearChart 2 or
ClearChart 3P, powered by the USB connection on the side of the device or with a separate AC adapter.
(Please refer to Figure IS-15.)
Figure IS-15, ClearChart Bluetooth Dongle Mount
The Phoroptor VRx Central Unit communicates through built-in Bluetooth using the antenna at the back
of the unit. (Please refer to Figure IS-16.) (Please refer to the instructions in the previous section,
Connecting Auxiliary Equipment with Reichert Wireless Serial Adapters, to connect devices to the
Phoroptor VRx using Bluetooth dongle serial adapters.)
Antenna for
Bluetooth
EMR
INSTRUMENT 1 PROJECTOR
PHOROPTOR
TRANSFER
PRINTER
INSTRUMENT 2
CONTROLLER
Figure IS-16, Antenna for Bluetooth - Central Unit
16241-101 Rev. D
24