Data Output - Emr - Ametek Reichert Phoroptor VRx User Manual

Instructions for Use

Data Output - EMR

It is essential to either send the Final refraction data to an EMR system or the printer before clearing
data and preparing for the next patient. The Final refraction data is not stored in the Phoroptor VRx, so it
cannot be recalled for reference at a later time. Data output options for refraction results include sending
data electronically to an EMR system, printing the data, and manually recording it. Select the EMR
option in the PORT SELECTION panel to view or change the settings. Select APPLY to save changes
which were made.
Note: Results may be both printed and sent to an EMR system as long as the user configures the
printer and EMR ports for output in the setup menu. (Please refer to Figure IU-45.)
EMR Output Options
The options for EMR Output are the following:
• Phoroptor VRx - Sends Phoroptor VRx final refraction data and, optionally, subjective refraction
data and binocular test results
• Phoroptor VRx Exp - Sends Phoroptor VRx final refraction data and, optionally, subjective
refraction data and binocular test results plus auto-refractor and lensometer data, if available
• AutoPhor - Sends Phoroptor VRx final refraction data only
• AutoPhor Exp - Sends Phoroptor VRx final refraction data plus auto-refractor and lensometer data,
if available
• Vis900 - Sends data in original Visutron 900+ format
94
(continued)
Figure IU-45, Port Settings
16241-101 Rev. D