Connection With The Auto Phoroptor Rs Auto Refraction System; Wired Connection; Wireless Connection - Ametek Reichert ClearChart2 User Manual

Installation, Features, & Functions
(continued)

Connection with the Auto Phoroptor RS Auto Refraction System

The ClearChart 2 can be configured for bi-directional communication with the Auto
Phoroptor RS automated refraction system. This can be achieved with a hardwired
serial connection or with wireless communication accessories.

Wired Connection

Wired communication between the ClearChart 2 and the Auto Phoroptor RS requires
connection of a NULL modem serial cable with 9 pin male connector on one end and 9
pin female connector at the other end. The cable should be connected to the serial port
on the ClearChart 2 and the serial port labeled "Projector" on the Auto Phoroptor RS
Central Unit.
Note: The Reichert part number for the interface cable between the Auto Phoroptor
RS and the ClearChart 2 is: 16200-440.
Serial port for connection
Serial port in the bottom of
of ClearChart 2 on the Auto
the ClearChart 2 housing
Phoroptor RS Central Unit

Wireless Connection

A wireless connection between the ClearChart 2 and the Auto Phoroptor RS can be
established with a pair of Bluetooth serial adapters. One serial adapter should be
®
connected to the serial port on the bottom of the ClearChart 2 housing and can be
powered through the USB connection on the side of the device or with a separate AC
adapter.
USB Connection
Wireless serial adapter
Order Reichert Bluetooth Kit 1
(Part number # 16766)
for this configuration
10
ClearChart 2 Digital Acuity System User's Guide 13760-101 Rev. H