Emr Output Options; Data Output - Ametek Reichert Phoroptor VRx User Manual

Instructions for Use
Data Output - EMR
After the exam is completed and the Data Output options are set, press the OUT button, or touch the
OUT icon to transfer the data to an EMR system. Refer to Figure IU-43 and the illustration below.
Note: The default data that is sent to the EMR system or the printer is Final refraction data. If you do
not save the measurement results as Final refraction data, the Subjective refraction data is sent.
Note: The volume of the transferred data depends on what the EMR software is configured to receive.
Note: The volume of the printed data depends on what measurements you selected for output in the
Settings Menu.

Data Output

Each patient data record includes:
• Sphere (Right and Left Eye, Far and Near)
• Cylinder (Right and Left Eye)
• Axis (Right and Left Eye)
• Prism (Right and Left Eye)
• Visual Acuity Distance Unaided and Aided (Right Eye, Left Eye, Binocular)
• Visual Acuity Near Unaided and Aided (Right Eye, Left Eye, Binocular)
• Vertex Distance
• Pupillary Distance
• Fused Cross Cylinder Add Value NRA/PRA
• Amplitude of Accommodation
• Distance Phoria (Horizontal, Vertical)
• Near Phoria (Horizontal, Vertical)
• Divergence (Blur, Break, Recover)
• Convergence (Blur, Break, Recover)
• Infravergence Right Eye (Break, Recover)
• Supravergence Right Eye (Break, Recover)
• Infravergence Left Eye (Break, Recover)
• Supravergence Left Eye (Break, Recover)
Data output also includes Lensmeter and Auto Refractor data, if you directly connected these external
devices to the Phoroptor VRx. To ensure proper output of data from these devices, select SUBJ, AR,
and LM data for EMR output in the Setup Menu.
In order to transfer data from the Phoroptor VRx to your EMR system, you need to download
ReichertCapture™ Software. You can download ReichertCapture™ Software and the
ReichertCapture™ user guide from www.Reichert.com.
16241-101 Rev. D
(continued)
(continued)
95