Taking A Scout Image Or 2D Views (Lat, Pa Or Lat-Pa) - Planmeca ProMax 3D Plus Manual

8.9 Taking a scout image or 2D views (LAT, PA or LAT-PA)

User's manual
NOTE
FOR PROGRAMS TOOTH AND TEETH:
The incisor light indicates the front edge of the image volume when the front
position is selected.
NOTE
Moving the positioning joystick switches the incisor light off.
NOTE
You can switch the functions on and adjust the preset exposure values as
described in section "Programs (2100)" on page 77.
You can take a scout image or 2D views (LAT, PA or LAT- PA) of the
selected image volume before you take the actual 3D image. This allows you
to check the volume position or, if necessary, confirm the need for a 3D
exposure.
NOTE
If the image consists of several volumes, scout imaging is available for the
first image volume (1/2) only.
NOTE
2D views are not available for all programs.
NOTE
Make sure that you have selected the correct patient and exposure mode in
the Planmeca Romexis program.
8 3D patient exposure
Planmeca ProMax 47