Table of Contents
Advertisement
X Assembly
Top Cover
The top cover can be removed to reveal the internal I/O connectors and cables. The top metal
cover is secured onto the chassis with six F3*4 zinc-coated screws — two on the front panel,
two on the top, and the other two on the bottom. Use a Phillips screwdriver to unscrew them.
User's Manual | OPS150-CS
x6
Top
Front Panel
Bottom
After the six above-mentioned screws are removed, place the system on a stable work surface,
and slide the cover towards the rear before removing it.
Chapter 2
HARDWARE INSTALLATION
10
Advertisement
Table of Contents
