Table of Contents
Advertisement
X Jumper Settings
Clear CMOS (JP1)
COM2
Audio
Out
1
LAN
JP1
1
Battery
If any anomaly of the followings is encountered —
a) CMOS data is corrupted;
b) you forgot the supervisor or user password;
c) failure to start the system due to BIOS mis-configuration
Intel
— it is suggested that the system be reconfigured with default values stored in the ROM BIOS.
To load the default values stored in the ROM BIOS, please follow the steps below.
1. Power-off the system and unplug the power cord.
H310
2. Put a jumper cap on JP2's pin 2 and pin 3. Wait for a few seconds and set JP2 back to
its default setting, i.e. jumper cap on pin 1 and pin 2.
3. Plug the power cord and power-on the system.
1
2
3
JAE TX25
„ 1-2 On: Normal (default)
User's Manual | OPS150-CS
Reset
Button
HDMI
4
1
CPU
SSD
Fan
LED
Socket LGA1151
1
2
3
„ 2-3 On: Clear CMOS
USB 1/2
PWR
(USB 3.0)
BTN
SPI Flash BIOS
Chapter 2
HARDWARE INSTALLATION
21
Advertisement
Table of Contents
