Heatsink And Fan - DFI OPS150-CS User Manual

Digital signage embedded ops computer

Hide thumbs Also See for OPS150-CS:

Table of Contents

Enlarged version

Assembly

Heatsink and Fan

The Heatsink and Fan can be mounted in two manners — fan on the right and heatsink on the

left, or fan on the left and heatsink on the right. The fan is mounted onto the heatsink and a fan

bracket screwed onto either side of the chassis. Please attend to the

Installation Steps Overview

Step 1: Fan Bracket Installation

Step 2: Heatsink Installation

Step 3: PCH Heat Spreader Installation

Step 4: Fan Installation

User's Manual | OPS150-CS

Config 1: Fan on the right

and heatsink on the left

Config 2: Fan on the left and

heatsink on the right

Step 1: Fan Bracket Installation

Install/remove the fan bracket by screwing/unscrewing the two screws at either side of the

chassis's exterior.

Config 1: Fan on the right and heatsink on the left

When installed correctly, the locations of the bracket and the screws shall resemble the follow-

ing photos.

Chapter 2

HARDWARE INSTALLATION

Orient the fan bracket as illustrated.

Insert the zinc-coated screws from the

exterior and fasten them tight onto the

chassis and the bracket.

Screws

Table of Contents