Table of Contents
Advertisement
X Board Layout
COM2
Audio
Mic In
Out
1
LAN
JP1
1
Battery
Socket LGA1151
Intel
H310
LPC
14
13
2
1
M.2 M Key
(Bottom Side)
JAE TX25
M.2 E Key
Note:
The M.2 M key and DDR4_2 sockets are located at the bottom side, and can be
accessed via the module covers on the bottom of the chassis without having to
remove the board from the chassis.
Important:
Electrostatic discharge (ESD) can damage your board, processor, disk drives,
add-in boards, and other components. Perform installation procedures at an ESD
workstation only. If such a station is not available, you can provide some ESD pro-
tection by wearing an antistatic wrist strap and attaching it to a metal part of the
system chassis. If a wrist strap is unavailable, establish and maintain contact with
the system chassis throughout any procedures requiring ESD protection.
User's Manual | OPS150-CS
Reset
Button
HDMI
4
1
USB 1/2
PWR
CPU
(USB 3.0)
SSD
Fan
LED
SPI Flash BIOS
X LEDs
BTN
Power Button (Standby Power LED)
Power
Button
Important:
When the Standby Power LED lights up, it indicates that there is power on the
system board. Power-off the PC then unplug the power cord prior to installing any
devices. Failure to do so will cause severe damage to the motherboard and com-
ponents.
Chapter 2
HARDWARE INSTALLATION
SSD LED
SSD
LED
16
Advertisement
Table of Contents
