Using Instruction - Heinner HEM-200BL Instruction Manual

www.heinner.com
V.

USING INSTRUCTION

 Before the first use:
1. Remove the coffee maker from the package, and check the accessories according to
the list.
2. Clean all the detachable components according to the following section of "CLEANING
AND MAINTENANCE". Then assemble them completely.
3. Ensure that the steel mesh place is in the correct position. Place the carafe on the
removable shelf.
4. Operate the appliance according to following sections of (do not put any coffee
powder in the steel mesh). Repeat 2-3 times.
 Make Espresso coffee:
1. Remove the tank cover by turning it in anti-clockwise. Pour appropriate water in the
water tank with the carafe. Do not exceed the maximum capacity.
Note:

The carafe has the cup marks, the maximum tank capacity is equal to 4 cups marks
water quantity. The minimum tank capacity is equal to 2 cups marks water quantity.

Before pouring the water into the water tank, be sure that the power cord is
unplugged from the power outlet and the steam knob is in the
2. Replace the tank cover in place by turning the cover in clockwise direction until it
locks in position.
3. Put the steel mesh into metal funnel, add coffee powder to steel mesh with
measuring spoon. A spoon of coffee powder can make about a cup of top-grade
coffee. Then press the coffee powder tightly with the tamper.
Note: Select your desired coffee powder to make the desired coffee cups, the steel mesh has
2 cups and 4 cups marks
4. Make sure that the tubers on the funnel align with the grooves in the appliance, then
insert in the funnel from the "INSERT" position, and you can fix the funnel into coffee
maker firmly through turn it anti-clockwise until it is locked in the "LOCK" position
(see Fig. 1).
5. Place the carafe on the removable shelf.
6. Plug the power cord into the outlet. Turn the steam knob to
indicator is illuminated. Wait for about 2 minutes, there will be coffee flowing out.
800W, 50Hz, 230V
OFF
RELEASE
position.
position, and the
16